Parts by Type

print This page

Yoke Shafts

Filters: JOINT ANGLE = ,
PART NUMBER SERIES PART TYPE SPLINE COUNT SPLINE DIA. SPLINE LENGTH C/L TO END END TO RADIUS BOOT NOTES VEHICLE CLASS BRAND
3R82-322 3R ISR 31/32 1.375 3.500 11.500 5.250 Like 3R82-321 but with long neck LD AAM
3R82-321 3R ISR 32 1.375 3.350 7.810 5.910 N2112504, 3R18-321 Used on Auto Trac Transfer cases from 1998-2007.
Includes GM K-series 4x4s, Hummer H2 and GM-G Vans.
Boot also available, part N2112504. 		LD AAM
40137666 1410 OSR 32 1.378 9.055 40123472 external splined shaft transmission yoke LD AAM
40006885 3R ISR 32 1.375 3.350 7.810 5.910 N2112504, 3R18-321 Auto Trac Transfer LD AAM
N5-82-01 1610 BP 16 2.000 2.875 9.220 5.400 For Short Coupled Shafts HD Neapco
N2-81-1181 1310 Flanged 32 1.378 3.500 0.000 6.380 3R18-321 PTI version is 3182-32. This part has a 2" Pilot and 3" BC. LD Neapco
NOE-12-2657-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
4.540" CL-CL 		LD Neapco
NOE-12-2658-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
8.54" CL-CL
 LD Neapco
NOE-12-5244-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
1.690" CL-CL
 LD Neapco
NOE-12-5122-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
8.02" CL-CL
AXLE DIAMETER .750		 LD Neapco
NOE-12-5139-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
7.49" CL-CL
AXLE DIAMETER .937		 LD Neapco
NOE-12-5147-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
7.650" CL-CL
AXLE DIAMETER .937		 LD Neapco
2682-800 7260 ISR 15 0.980 0.675 4.500 3.000 Fits Mercury outdrives LD PTI
1482-62 1451-22 OSR 16 1.063 3.000 6.385 4.250 Volvo LD PTI
3082-62 1300 OSR 16 1.375 3.650 7.310 5.750 3051-27 Volvo LD PTI
2682-801 7260 ISR 17 1.125 3.000 11.375 9.500 Fits Mercury outdrives LD PTI
3482-18 3451 OSR 18 1.470 5.125 8.500 6.000 This yoke shaft will not fit the OEM splined sleeve. Old PTI Sprinter style usage. LD PTI
1182-241 9951-22 Staked 24 0.972 1.693 5.130 3.272 N/A Infiniti Front Shafts, Staked joints LD PTI
1182-242 9951-22 Staked 24 0.972 1.575 4.461 3.265 N/A Infiniti Front Shafts LD PTI
1182-243S 1151-243 OSR 24 0.972 1.575 4.449 3.265 N/A Infiniti Front Shafts with snap rings LD PTI
1182-243L 1151-243 OSR 24 0.972 1.575 5.157 3.265 N/A Infiniti Front Shafts with snap rings, tip is pointed LD PTI
2182-272 1210 OSR 26/27 1.161 4.019 6.432 4.713 2716-497, 2715-285, 2714-612, 2182-272M Can only be used with 26/27 sleeves, machined for clearance on CB. LD PTI
3182-272 1310 OSR 26/27 1.161 4.060 6.750 5.250 2716-497, 2715-285, 2714-612 Can only be used with 26/27 sleeves LD PTI
2182-27 1210 OSR 27 1.161 4.019 6.432 4.713 2716-497, 2715-285, 2714-612 BMW Yoke shaft LD PTI
2782-272 1751 OSR 27 1.147 1.181 3.375 1.875 BMW Front Shaft LD PTI
3182-271 1310 OSR 27 1.161 4.060 6.750 5.250 2716-497, 2715-285, 2714-612 LD PTI
2782-271 1751 OSR 27 1.147 1.181 2.750 1.300 BMW Front Shaft LD PTI
3182-311 1310 OSR 31 1.330 3.750 7.125 5.700 2718-628 1.378" (35mm) Bearing Surface LD PTI
3182-32 1310 CV 32 1.378 3.500 9.500 7.500 3R18-321 CV conversion for GM Auto Trac
Used on GM front shafts		 LD PTI
3182-322 1310 CV 32 1.378 3.500 10.250 5.875 GM Front Auto-Trac LD PTI
P170-82-71X SPL170 SPRTAB 34 3.464 10.335 13.850 9.130 100-30-2-156M HD PTI
P170-82-21X SPL170 SPRTAB 38 3.858 9.193 11.811 7.800 211959X Mates with 250-55-31X sleeve HD PTI
P250-82-21X SPL250 SPRTAB 38 3.858 8.555 11.811 7.820 211959X Mates with 250-55-31X sleeve HD PTI
3-82-981 1350 Staked 10 1.500 1.500 5.820 0.000 LD Spicer
2-82-1731 1210 OSR 15/16 1.250 2.250 8.391 7.866 LD Spicer
6-82-1331-1 1710 BP 15/16 2.500 3.500 9.656 6.656 Obsolete HD Spicer
2-82-211 1310 OSR 16 1.250 1.656 4.594 2.938 LD Spicer
2-82-41 1310 OSR 16 1.250 2.000 5.812 2.063 LD Spicer
2-82-58X 1310 OSR 16 1.375 2.500 7.062 5.190 LD Spicer
3-82-1321 1350 OSR 16 1.500 2.000 5.844 3.781 LD Spicer
3-82-1301 1410 OSR 16 1.500 2.000 5.406 3.312 LD Spicer
3-82-268X 1410 OSR 16 1.500 3.000 8.969 6.281 LD Spicer
3-82-781 1410 OSR 16 1.750 3.000 6.340 4.410 LD Spicer
5-82-961-5 1610 BP 16 2.000 3.500 14.063 10.063 HD Spicer
5-82-871 1610 BP 16 2.000 3.000 7.297 4.547 HD Spicer
6-82-1381 1710 BP 16 2.500 3.160 10.320 6.980 HD Spicer
4-82-621-3 1550 OSR 16 2.500 1.562 5.609 3.672 LD Spicer
4-82-621-4 1550 OSR 16 2.500 1.562 6.188 4.250 LD Spicer
6-82-1391 1710 BP 16 2.500 3.000 8.650 5.906 HD Spicer
6-82-1371 1710 BP 16 2.500 2.750 8.910 5.570 HD Spicer
6-82-1411 1710 BP 16 2.500 3.160 9.820 6.480 Obsolete HD Spicer
5-82-951-1 1610 BP 18 2.672 1.500 7.140 5.080 Spline not glidecoated HD Spicer
2-82-1961 1330 OSR 23 3.000 4.140 8.250 5.550 mates with 2-55-278X sleeve, uses 212115X boot LD Spicer
3-82-1151-2 1350 OSR 30 1.302 2.219 6.590 5.430 LD Spicer
140-82-21X SPL140 SPRTAB 30 3.071 8.661 11.811 7.660 212059X 91-30-2-132M boot can replacement, used with 140-55-21X sleeve HD Spicer
170-82-121X SPL170 SPRTAB 34 3.425 8.720 12.441 7.720 100-30-2-115M, 170-82-131X HD Spicer
170-82-191X SPL170 SPRTAB 34 3.464 7.500 11.062 6.340 100-30-2-84M HD Spicer
170-82-101X SPL170 SPRTAB 34 3.464 9.744 13.457 8.730 100-30-2-141M Active HD Spicer
170-82-71X SPL170 SPRTAB 34 3.464 10.335 13.850 9.130 100-30-2-156M HD Spicer
170-82-21X SPL170 SPRTAB 38 3.858 9.193 11.811 7.800 211959X Mates with 250-55-31X sleeve HD Spicer
250-82-21X SPL250 SPRTAB 38 3.858 8.555 11.811 7.820 211959X Mates with 250-55-31X sleeve HD Spicer